When do I need an external air supply for the oven?

When choosing a wood-burning stove, you will encounter the following information on some models: external air supply, possibly CPV – central air conditioning.

What exactly does that mean?

Very easy: Fire needs air to burn. The oven can draw air from the room in which it is located, or the combustion air can be supplied from outside via a pipe.

And that’s exactly what the external air supply is for.

Why do ovens need an air supply at all?

Wood needs oxygen to burn, therefore the stove constantly consumes air during operation.

In stoves without an external air supply, combustion air is drawn from the room. The required amount of air must then be returned to the house in some way.

In older houses, this was often not a major problem. Windows, doors, and the building structure itself were not completely airtight, and air naturally entered through various leaks.

Modern houses, however, are completely different.

New windows, high-quality insulation, and airtight construction significantly reduce the uncontrolled influx of outside air. In such houses, the correct supply of combustion air to the stove is of great importance.

What is external air supply?

Stoves with an external air intake have a connection box to which a pipe can be connected to supply combustion air from the living space.

The oven is therefore not solely dependent on the air in the room for combustion.

Depending on the specific design and solution, the air supply can, for example, be provided through a surrounding wall or through another suitably designed opening.

However, the specific implementation method must comply with the requirements of the furnace manufacturer and the structural conditions.

When is an external air supply important?

New buildings and very well-sealed houses

This is where you will most often encounter an external power supply.

A modern house should be as airtight as possible. While this is advantageous in terms of energy loss, we cannot assume that the stove will simply “draw” the necessary air from somewhere.

Therefore, if you are building a new house and planning to include a stove in your project, it is advisable to consider the combustion air supply. before purchase and installation.

Of course, some things can be solved additionally, but a ready-made offer is much easier than searching for a solution in a finished interior.

Houses with heat recovery

Particular attention must be paid to the construction of the oven and the air supply.

The heat recovery system operates with controlled air supply and exhaust within the building. Wood-burning stoves are another appliance that requires air for operation and simultaneously expels exhaust gases through a chimney.

Therefore, it must be this way. Oven, chimney, combustion air supply and ventilation system evaluated as a whole.

The mere statement “The oven has an external connection” does not automatically mean that a particular installation is suitable for every house with heat recovery.

Very narrow windows and renovated houses

External power supply is not only a problem in new buildings.

A typical situation can also occur in an older house after a renovation. Old, leaky windows are replaced with modern ones, the house is insulated, and this significantly alters the air circulation within the building.

What worked perfectly before the renovation may not work the same way afterwards.

What can happen if the oven doesn’t get enough air?

A lack of combustion air can negatively affect combustion and the proper functioning of the oven and the exhaust system.

For example, one might observe the following:

  • problematic fire ignition
  • unstable or poor combustion
  • Excessive smoking when lighting the candle
  • faster soiling of glass,
  • poorer combustion.

But such manifestations This may not automatically indicate a problem with the air supply.Similar problems can also have other causes – for example, insufficient chimney draft, poorly dried wood, an unsuitable heating method, or a problem with the exhaust gas path.

Therefore, it is not sensible to determine the cause based on a single symptom alone.

Extractor hood and hob: A combination to be wary of.

It is also very important Extractor hoods and other appliances that remove air from the house.

A powerful extractor hood can remove a considerable amount of air from a room. If the house is well-insulated and the stove is in use at the same time, the appliances can interfere with each other.

Other systems that generate negative pressure must also be considered.

Therefore, the design must take into account not only the oven itself, but also… the entire air balance of the room and the house.

Does an external air inlet mean that the oven is completely airtight?

Not necessarily.

That is an important difference.

The indication “external air supply” means that the respective oven allows the supply of combustion air from an external source.

However, this does not automatically mean that the oven is certified as completely independent of the room air or that it is automatically suitable for every type of airtight construction.

If your project requires a specific certification or room-air-independent operation, this feature must be verified. for a specific oven modelnot only through the presence of an external air outlet.

Where does the outside air come from?

That depends on the specific building.

The entrance could be designed as follows, for example:

  • through the perimeter wall,
  • pre-installed pipes in the house construction,
  • in different ways, depending on the project and installation requirements.

Therefore, it cannot be said in general that every pipe simply has to be led “somewhere outside”.

It is necessary, above all, to respect Requirements of the manufacturer of a specific ovenConnection diameter, permissible supply line and conditions of the respective building.

What diameter must the external water supply have?

There is no single diameter that applies to all ovens.

A particular model has a connection specified by the manufacturer, and the installation must be designed accordingly.

Therefore, we recommend that you first select a suitable stove or at least make a selection. Prepare only specific connections according to their technical specifications..

This is particularly important for new buildings, where the pipes can be prepared during the construction work.

Where is the external air connection of the oven located?

There is no one-size-fits-all solution here either.

Depending on the design of the oven, the connection may be located, for example, on the back or on the underside of the appliance.

If you already have an air supply in your house, check this before buying an oven:

Diameter, position and connection type of the external inlet for a specific model.

A difference of a few centimeters can be much more important during actual installation than when looking at a photo of the oven on the internet.

Do I also need an external power supply in an old house?

There is no simple “yes” or “no” answer.

An older, leaky house may have good natural air circulation. Conversely, a completely renovated older house with new windows and significantly improved airtightness may exhibit similar properties to a more modern building.

So it depends the actual condition of the house and the installation conditions, not just the year of construction.

I have an external power supply. Can I buy any oven with a CPV system?

NO.

When making your selection, you should at least check the following:

  • whether the oven actually supports an external power connection,
  • Connection diameter
  • its location
  • Manufacturer’s requirements for the design of the power supply,
  • requirements of a specific building
  • Suitability of the oven for the chimney and exhaust system.

If you already have a water supply built into the floor or wall, Please check the oven’s parameters before ordering..

An external air supply does not solve all problems.

It’s good to understand it as part of the overall system.

A properly functioning stove requires a properly constructed structure:

Device + combustion air supply + chimney + exhaust path + room conditions.

Therefore, for example, even a perfectly executed external air intake cannot compensate for an unsuitable chimney.

➡️ [Jaký komín potřebuji ke kamnům?]

It is also important to choose the appropriate heating power for the stove. Especially in modern, well-insulated houses, an overly powerful appliance can cause a much bigger problem than it initially appears.

➡️ [Jaký výkon kamen potřebuji?]

Which oven should you choose?

If you know that you need an external air supply, you don’t need to check this feature for each oven individually.

You can only view models that external air supply enabledand then refines the selection based on performance, dimensions, flue pipe diameter, stem length and other parameters.

[Vybrat kamna s externím přívodem vzduchu]


Frequently Asked Questions

What does CPV mean for ovens?

CPV stands for central air supply. The stove allows combustion air to be supplied from an external source, instead of relying solely on room air.

Does the oven need air from the room?

Every stove needs air for combustion. The difference lies in the source of the air. Stoves without an external air supply draw their combustion air from the room. Stoves with a properly connected external air supply can draw it from outside.

Do I need an external air supply in a new building?

In modern, airtight buildings, the combustion air supply is of great importance and should be included in the system design. However, the specific solution depends on the building’s construction, the ventilation method, and the chosen stove.

Are ovens with external heat input suitable for heat recovery?

The mere presence of an external energy supply is not a sufficient guarantee. In a house with controlled ventilation, the specific stove, its operation, the air supply, the chimney, and the ventilation system must be checked.

Can I let outside air through the wall?

This is possible for some installations; however, the installation method, dimensions, and other conditions must meet the requirements of the specific appliance and the building. Therefore, the same solution cannot be recommended for all ovens.

How do I find out the diameter of the external inlet?

You can find this information in the technical specifications or installation documentation for the respective model. If you already have a power cable, we recommend that you check not only its diameter, but also its position and connection options before purchasing a new one.


Do you already know that you want an oven with an external air supply?
Use our parameters and filters to display only models that offer this option.

Shopping Basket
Scroll to Top