Oven with or without a heat exchanger?

When choosing a wood-burning stove, you essentially have two options: classic hot air oven without heat exchanger And Stove with water heater.

At first glance, it may seem logical:

“If I buy a stove, I’ll get one with a heat exchanger and use it to heat the whole house.”

Sometimes it’s a really good solution. In other cases, a heat exchanger would only unnecessarily increase the cost and complexity of the entire system.

It’s not important which option is generally better. What’s important is that What function does a stove serve in your house?.

What is the difference between them?

Stove without heat exchanger

Classic wood-burning stoves primarily radiate heat directly into the room in which they are located.

Part of the heat is transferred by radiation through the glass and the surface of the oven, another part heats the surrounding air.

They are suitable, for example, if you want the following:

  • Primarily to heat a room or an open living area.
  • preheat the oven
  • have an additional heat source besides the main heating system.
  • The oven is primarily used to generate pleasant direct heat and a fire indoors.

Their great advantage is simpler installation and the entire system.

Stove with hot water exchanger

Stoves with heat exchangers also heat the room they are in, but they release some of the generated heat. into the water in the heating system.

Depending on the type of connection, the heated water can then release energy to radiators, underfloor heating or a storage tank.

The oven will thus become part of The house’s hot water heating systems.

And that is their main difference.

It’s not simply a stove with a few extras. It’s a heat source that needs to be professionally constructed and connected to the entire system.

What do “electricity supply for water” and “electricity supply for rooms” mean?

This is one of the most important details for ovens with heat exchangers.

For example, imagine a stove with a total power output of 10 kW.

It does not meanthat everything 10 kW goes to the radiators.

Part of the electricity can be directed into the water, the other part directly into the room where the oven is located.

Therefore, when choosing a particular model, pay special attention to the following:

Total performance,
Energy in water,
Performance in space.

Their ratio will help you decide whether the oven is suitable for your home.

Why is the power supply in the room so important?

Imagine a well-insulated house with a living room that requires very little heat.

You choose a high-performance oven with a heat exchanger because you want to heat the radiators throughout the house.

However, some of the heat from the stove remains in the living room.

If this value is too high, the room with the stove can become uncomfortably warm, even though the rest of the house still needs to be heated.

Therefore, when it comes to ovens with heat exchangers, it is not enough to simply say:

“I need 12 kW.”

You should also know:

How many of these 12 kW do I need for the water, and how many can remain in the room?

➡️ [Jaký výkon kamen potřebuji?]

When are ovens with heat exchangers a good idea?

A hot water heat exchanger, for example, can be a suitable solution if you want to heat the oven. more roomswhich are already connected via a hot water heating system.

Instead of the heat spreading from the living room through doors and hallways via the air, it is transported to where it is needed using water.

They can also be useful if you want to integrate the oven as one of the heat sources into a more complex system.

However, the specific implementation always depends on the heating system of the house.

When are ovens without heat exchangers better?

If you primarily want to heat the living room, a larger open space, or simply generate additional warmth with the stove, the classic design without a heat exchanger can be significantly easier.

You don’t need to worry about connecting the stove to the hot water system and the associated technical components.

A simpler system usually also means fewer components that need to be professionally designed, installed and maintained.

Therefore, there is no reason to buy a heat exchanger “just to be on the safe side” if you don’t actually need its function.

Ovens with heat exchangers require professional installation.

Traditional stoves require proper connection to the chimney and safe installation.

This is even more the case with ovens that have a hot water heat exchanger. Connection to the heating system.

Depending on the specific solution, such a system could include, for example, the following:

  • circulation pump
  • Storage tank
  • Expansion vessel
  • Safety and regulatory elements,
  • Overheating protection
  • Other elements depending on the specific compound.

The exact solution depends on the specific oven and heating system.

Therefore, connecting an oven to a heat exchanger should be done by a specialist.

What happens during a power outage?

This is a question to consider before installation.

In many modern heating systems, an electric pump ensures water circulation.

However, the oven does not immediately stop generating heat after a power outage – the wood inside continues to burn.

Therefore, the entire system must be designed to be safe even in the event of a failure, power outage, or other non-standard conditions.

The specific protective solution depends on the type of oven and the heating system used.

What is an after-cooling circuit?

With some ovens that have a hot water exchanger, it can happen that… Aftercooling circuit.

Its function is to protect the system from overheating if the water temperature rises dangerously high.

However, this does not mean that every stove has the same safety solution.

Therefore, it is necessary to consult the documentation during selection and installation. specific model and from the design of the entire heating system.

Do I need a storage tank?

The storage tank stores some of the heat generated in the heated water, which can be used later.

This can be very useful when heating with wood, as the combustion power cannot be changed as easily as, for example, the power of an electric heater.

Whether a storage tank is suitable or necessary, and what volume it should have, cannot be determined solely from the fact that one has opted for a stove with a heat exchanger.

It depends on:

  • Device performance
  • the features of the house,
  • heating system
  • other heat sources,
  • how to use the stove,
  • Manufacturer’s requirements and heating engineer’s planning.

Can stoves with heat exchangers also heat domestic hot water?

In some appropriately designed systems, the waste heat from the stove can also be used to heat water.

However, this does not mean that the boiler is simply connected directly to the oven.

The connection method depends on the overall system, the storage device used, the control system, and other heat sources.

If you also want to use the stove to prepare hot water, you should take this into account. already during the planning of the heating system.

Can I use a stove with a heat exchanger without water?

No, unless the manufacturer of the respective device permits such operation.

The hot water heat exchanger is an integral part of the furnace, and the conditions specified by the manufacturer must be observed during operation.

Therefore, do not buy a stove with a heat exchanger expecting that:

“I will use them normally now and connect the heat exchanger in about two years.”

First, it must be examined whether a particular model allows for such an application method.

Does the heat exchanger mean higher efficiency?

The mere presence of a heat exchanger does not automatically mean that the stove is “better” or more economical.

The exchanger is paramount. It changes the way the generated heat is distributed and where it can be transported..

When comparing efficiency, it is necessary to rely on the technical data of specific models and not just on whether they have a heat exchanger or not.

Don’t forget the chimney.

A stove with a heat exchanger is still a solid fuel appliance and requires a suitable chimney and flue.

Therefore, it is not enough to only check the heating system before buying.

Furthermore, it must be checked whether the chimney is suitable for a particular appliance.

➡️ [Jaký komín potřebuji ke kamnům?]

It can also be important to properly resolve the combustion air supply issue.

➡️ [Kdy potřebuji externí přívod vzduchu?]

So: with or without a heat exchanger?

A simple question can help:

Where does the heat from the stove come from?

If you are primarily looking for the room where the stove is located, and possibly the surrounding open areas, you will generally be looking for the following: Stove without a water heater.

If you want to transfer a significant amount of energy using water to radiators, underfloor heating, storage tanks, or other parts of the house, you may need Stove with water heater.

In this case, you should not base your choice solely on overall performance.

Pay attention to the following:

  • Total performance
  • Converting energy into water,
  • Electricity in the room,
  • Manufacturer’s wiring requirements,
  • Safety features
  • Chimney parameters,
  • Options for the entire heating system.

Choose a stove based on your actual needs.

You can choose from our menu. Wood-burning stove with hot water exchanger and then filter them by performance and other technical parameters.

[Vybrat kamna s výměníkem]

If you do not need a converter:

[Vybrat krbová kamna bez výměníku]


Frequently Asked Questions

What does the power rating of a water heater mean?

This portion of the stove’s output is transferred to the water in the heating system via the hot water heat exchanger. The remaining portion of the stove’s output is primarily transferred to the room in which the stove is located.

Can a stove with a heat exchanger heat the whole house?

They can make a significant contribution to heating the entire house or be part of a system that heats the whole house. However, this depends on the heat loss of the house, the output of the stove, the energy distribution in water and space, and the design of the entire heating system.

Are ovens with heat exchangers better than ovens without heat exchangers?

No. These are two different types of heat utilization. A heat exchanger may be completely unnecessary for heating a single room. However, it may be necessary for transferring heat to a house’s hot water system.

Shopping Basket
Scroll to Top