HEATER 17 kW convection stove, with hotplate, version 2023. A robust firewood stove intended for production workshops, utility buildings, larger business premises, warehouses and halls.
The tubular body uses natural convection: cooler room air enters at the bottom, warms in the tubes around the firebox and flows back into the room without a fan.
This tubular-stove design follows the principle introduced by Eric Darnell in 1975. This appliance is a HEATER-brand product.
The upper hotplate can be used to warm cookware and prepare simple meals.
This is the 2023 version with revised construction and appearance.
Key features
- Rapid heat transfer by natural air circulation without an electric fan
- Grate-free combustion on a continuous bed of ash, with simple air-supply control
- Firebox for logs up to 600 mm long
- Robust steel construction suitable for regular use
Output selection: the stated heated room volume is a maximum guideline. The required output depends on heat loss, insulation, operating conditions and chimney parameters. Check suitability for the actual installation.
Technical specifications
| Model | 17 kW with hotplate, version 2023 |
|---|---|
| Product code | stk-17kw-p-v2023 |
| Nominal heat output | 17 kW |
| Maximum heated room volume | 300 m³ |
| Dimensions (H × W × D) | 850 × 650 × 900 mm |
| Weight | 110 kg |
| Flue diameter | 150 mm |
| Flue outlet | rear |
| External combustion air supply | no |
| Fuel | firewood |
| Efficiency | 80,9 % |
| Energy class | A+ |
