HEATER 24 kW convection stove, with hotplate. A robust firewood stove intended for large workshops, warehouses, production and agricultural halls, and other large-volume spaces.
The tubular body uses natural convection: cooler room air enters at the bottom, warms in the tubes around the firebox and flows back into the room without a fan.
This tubular-stove design follows the principle introduced by Eric Darnell in 1975. This appliance is a HEATER-brand product.
The upper hotplate can be used to warm cookware and prepare simple meals.
Key features
- Rapid heat transfer by natural air circulation without an electric fan
- Grate-free combustion on a continuous bed of ash, with simple air-supply control
- Firebox for logs up to 780 mm long
- Robust steel construction suitable for regular use
Output selection: the stated heated room volume is a maximum guideline. The required output depends on heat loss, insulation, operating conditions and chimney parameters. Check suitability for the actual installation.
Technical specifications
| Model | 24 kW with hotplate |
|---|---|
| Product code | stk-24kw-p |
| Nominal heat output | 24 kW |
| Maximum heated room volume | 500 m³ |
| Dimensions (H × W × D) | 850 × 650 × 1050 mm |
| Weight | 125 kg |
| Flue diameter | 160 mm |
| Flue outlet | rear |
| External combustion air supply | no |
| Fuel | firewood |
| Efficiency | 80,9 % |
| Energy class | A+ |
