HEATING – Czech hot air wood stove

HEATER is a Czech brand of wood-fired warm-air stoves, specializing in the rapid heating of small and very large rooms. The production of HEATER stoves builds upon the company’s metalworking heritage, which dates back to [year missing]. 2003 was founded; the HEATER hot air furnaces themselves have been in use since 2006 manufactured.

A typical feature of the HEATER stove is its robust steel construction with heat exchanger tubes around the combustion chamber. The heated air flows naturally through the tubes, thus enabling rapid heat transfer to the room.

Show all heaters

HEATING Hot air oven

The basic model series consists of hot air ovens with the following power levels: 6, 9, 12, 17, 20, 25, 30 and 35 kWAs the power output increases, the length of the furnace, the combustion chamber and the number of heat exchanger tubes also increase.

Thanks to the diverse performance options, HEATER stoves can be used for heating, for example:

Holiday homes and cabins,
Workshops and garages,
Clubhouses and common rooms,
warehouses,
facilities
production halls,
other larger objects.

HEATING Hot air oven

Heating unit with hot water heat exchanger

One of the most important options of the HEATER oven is the addition of Hot water heat exchanger.

The hot water heat exchanger allows a portion of the stove’s output to be used for hot water production within the heating system. The heat exchanger’s capacity varies depending on the stove size – the manufacturer offers heat exchangers for different output levels, from approximately 4 to 12 kW.

For example, the HEATER 30 kW stove can be equipped with a water heater of size 12 kW. We also offer this configuration as a separate variant of the HEATER 30 + 12 kW stove.

Heating unit with hot water heat exchanger

How HEATER ovens work

The combustion chamber is surrounded by steel heat exchanger tubes. Cooler air enters the lower part of the tubes, heats up around the heated combustion chamber, and then flows back into the heated space.

The oven thus utilizes natural air circulation without the need for an electric fan.

The manufacturer also uses rust-free combustionA layer of ash remains at the bottom of the firebox, forming the base of the fireplace.

Depending on the model, the oven can be supplemented with components such as:

Hot water exchanger
Hot air exchangers for flue gases,
Hot air collector,
cladding,
Stand,
glass door
Catalyst.

For example, the manufacturer offers these accessory options directly for the models HEATER 25 and 30 kW.

How to select the power level of the heater

When choosing a stove, the maximum heating output is not the only decisive factor. The size and heat requirements of the object to be heated must also be taken into account.

The individual HEATER models differ significantly, especially in the following ways:

Perfomance,
combustion chamber size
the number of heat exchanger tubes,
the length of the usable protocols,
the diameter of the exhaust pipe,
Weight,
Fuel consumption.

For example, the basic product line ranges from the model 6 kW with a length of approximately 780 mm to the HEATER 35 kW with a length of approximately 1320 mm, which can also process tree trunks over one meter long. HEATER-KAMNA.cz

Certification and documentation of HEATER ovens

For each individual model, the manufacturer publishes technical documentation, which may include, in particular, the following:

Installation and operating instructions,
Declaration of Performance
Energy label
Certificate,
Technical parameters of the product.

The documentation always refers to the selected type of oven.

The manufacturer states that the currently offered HEATER models 25, 30 and 35 kW meet the requirements. Ecodesign And BImSchV Level 2.

HEATER ovens for Germany and Austria

HEATER also exports its stoves abroad, including to Germany and Austria.

Documenting emission requirements is particularly important for the German market. BImSchV Level 2The manufacturer also offers catalysts for individual exhaust pipe diameters, designed primarily for markets with stricter emission requirements.

Before installing abroad, we always recommend checking the documentation for the respective model as well as the requirements applicable at the installation site.

Contact us